Swarovski 3700 – 6mm Fern Green 2 beads
Swarovski 3700 – 8mm Fern Green 2 beads
Swarovski 3700 – 10mm Fern Green 2 beads
Swarovski 3700 – 12mm Fern Green 2 beads
Swarovski 5328 – 4mm Golden Shadow/ Hyacinth/Crystal AB 2 beads
Swarovski 3601 – 4mm Golden Shadow/Crystal AB 2 beads
Silver Ear Wires 2pcs
Silver Head Pins
STEP 1: String onto one silver headpin: one Swarovski Bead 5601 4 mm; one Swarovski Sew-on Stone 3700 12 mm,one Swarovski Sew-on Stone 3700 10 mm; one Swarovski Sew-on Stone 3700 8 mm; one Swarovski Sew-on Ston3700 6 mm; one Swarovski Bead 5328 4 mm.
STEP 2: Turn loop on headpin.
STEP 3: Open loop on bottom of ear wire, attach to loop formed on headpin & close loop to secure.
STEP 4: Repeat steps 1 – 3 for other earring.
You will need a Round nose pliers and a Chain nose pliers to complete this project
2 x Crimping tube, 2 x 1.8 mm, silver,
2 x French ear wire, silver,
2 x Jump rings, 4 mm, silver,
2 x Jump rings, 5 mm, silver,
Tiger tail, 0.31 mm, grey, 80 cm
Beads : Swarovski Article No. 5000 , 6mm – 26 pcs ( Choose you own colour )
Pendants : Swarovski Article No. 6000, 11×5.5mm or 6007, 7x4mm – 24 pcs
Flat nose pliers
Step 1: cut 35 cm tiger tail with a side cutter. slide on the 13 swarovski crystal Pearls article 5810 6 mm alternating
with 12 swarovski Pendants article 6007 7×4 mm (starting with a swarovski Bead article 5000). slide on a
crimping tube after the crystals.
Step 2: go through the crystals and the crimping tube twice. crimp the tube with crimping pliers as shown in the
Step 3: open a 5 mm jump ring sideways with flat nose pliers. Hang a 4 mm jump ring onto the open 5 mm jump ring
and hang it on the earring (on the tube). close the jump ring as shown.
Step 4: open the French ear wire with flat nose pliers. attach it to the 4 mm jump ring and close the ear wire. repeat
steps 1 – 4 for the second earring.